NTP Display with 100mm LED numerals and
Power over Ethernet in a high quality metal housing
This Product is replaced by RGB NTP Displays
Key Features:
- 4 or 6 Digit red LED Display
- large 100mm numerals, visible over 50 mtrs.
- 12h/24h Time option
- Power over Ethernet, no Power Supply needed
- High Quality Stainless Steel or Aluminium Housing
- DHCP or static IP addressing
- Telnet configuration
These displays work excellent with all Meinberg Lantime Time Servers
Plug directly into an Ethernet jack on your local area network. No AC plug is required, so installation is inexpensive and it’s easy to move clocks around. Time updates are received automatically over the network, and no specialized software is required - control one or hundreds of clocks with a simple telnet session. These devices make practical use of PoE standards to eliminate electrical wiring requirements and simplifying installation.
Note: The local area network must support IEEE 802.3af Power over Ethernet in order for the PoE clocks to operate. If the network is not currently PoE-enabled and is going to support a PoE digital clock, a Single Port Midspan Power Injector must be added to the 10/100 BaseT LAN.
ONT4 Models | ONT6 Models | |
---|---|---|
Display Face 4-Digit, Red 7-segment LEDs | Display Face 6-Digit, Red 7-segment LEDs | |
Dimensions 12”L X 6”H X 2.2”D (30 cm X 5.6 cm) | Dimensions 17.5”L X 6”H X 2.2”D (44.5 cm X 5.6 cm) | |
Cabinets Plastic in Black, Putty, or Off-White, Brushed Stainless Steel | Cabinets Aluminum in Black, Putty, or Off-White, Brushed Stainless Steel | |
Weight Plastic Cabinet: 2 lbs (0.9kg) | Steel Cabinet: 3.8 lbs (1.7kg) | |
Weight Aluminum Cabinet 2.5 lbs (1.1 kg) | Steel Cabinet 5 lbs ( 2.3 kg) |